-40%

Dell Alienware M15x M17x Video Card Copper Shim Mod 3MF8R YT99J

$ 5.78

Availability: 69 in stock
  • Material: Copper
  • Restocking Fee: No
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Type: Thermal Pad
  • Brand: Dell
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days

    Description

    Dell Alienware M15x M17x Video Card Copper Shim Mod
    Thermal paste is not included and is required to install the shim kit.  You will need to have your own thermal paste.
    Dell uses thermal glue/putty to fill a gap between the gpu and heatsink shown in the first picture above.  This is a poor quality thermal solution and if you open your card it will leave it unusable.
    Because of the gap the thermal putty/glue had filled just thermal paste will not make good solution and over time will cause the gpu to overheat, see pictures above.
    Use this shim mod to lower your temps 15%+ and keep gpu failure from happening.
    The without shim picture above shows the temp with the stock thermal glue, with just thermal paste the temps reach 70-75c
    With the mod the card idles at a lower temp, the temp raises slower and the max temp is 10-15% less compared to stock
    Included
    2 shim thicknesses, 512mb and 1-2gb cards use different thicknesses
    Free materials to lap/polish your gpu and heatsink contact
    Online pictured instructions
    For cards with rectangle gpu's use my other auction
    CLICK HERE
    or use link https://www.ebay.com/itm/271138405537