-40%
Oil pressure sender, 0-100 psi, Datcon 240-33 ohm, w/20 psi alarm, blade type
$ 10.56
- Description
- Size Guide
Description
Brand new Stewart-Warner type oil pressure sender.New blade type terminals so there is no chance to break for the terminals
Input: 0-100 psi.
Output: 240-33 ohms resistance. Case grounded. Stewart-Warner type.
S - signal output blade.
WR - Low 20 psi alarm switch.
Ground - case;
w
hen pressure is bigger than 20 psi, the WR switch will be open, when pressure is smaller 20 psi, the WR switch will be closed, or connect to ground.
Accuracy: within 5% full scale.
Thread: 1/8”-27 NPT. See our fitting set for other thread size below.
White zinc environment friendly plated, RoHS compliant.
Wiring connectors: 8-32 stud, with blades and socket.
Symbols: S for signal, should use wide blade, G for grounding.
Hardware bag include: sockets, insulating sleeves.
Dimensions: body diameter 1.76", body length 1.5", total length 3".
This is a high quality, high reliable sender, can be used in gas. This sender is made by our specifications, using strong spring, high grade seal ring, etc..
For different thread size, 1/4", 3/8", 1/2" NPT, see blow:
272326336606
We will give you .00 refund if you buy the above fitting set.
For matching gauges, see below link:
1921055017
16612838017
For other oil pressure sender, see link:
1921056017